new century heaters
Immersion Heaters For Molten Melting
New Century Heaters has engineered our immersion heaters for molten melting . These heaters coupled with specially designed protection tubes provide the most robust and efficient molten metal heat source in the industry.
- Drop Shipping to Installation Facilities is Available
- Dedicated Customer Service Representatives
- Dedicated Customer Service Representatives
- Industry-Leading Manufacturing Timelines, Expedites Also Available
heaters are single phase
When used in holding furnaces, immersion heaters more efficiently transfer heat into dip wells and degassers. The heat does not have to pass through an insulating layer of oxides on the surface of the melt.
save up to 30% on energy
Power requirements are typically 25-30% less than glow bar furnaces. The reduction in melt loss and improved metal quality over glow bar and gas fired reverb furnaces is significant.
controls available
We also supply additional products such as Seal Cones, Ceramic Inserts, Thermocouples, Mounting Hardware, Protection Tubes and more.
made in the usa
New Century Immerison Heaters are designed & manufactured in Eau Claire, Wisconsin, U.S.A.
Immersion Heaters are the Ideal Solution for:
hOLDING FURNACES
DEGASSING STATIONS
LADLE MELTING FURNACES
HIGH PURITY MELTERS
MOLTEN METAL
FILTER BOXES
AUTOMATIC POUR
SYSTEMS
LOW PRESSURE
FURNACES
TEMPERATURE BOOSTERS IN DIP-WELLS
IMMERSION HEATER SELECTION
VERTICAL IMMERSION HEATERS
Vertical immersion heaters are installed vertically into the bottom of a tank or container, with the heating element submerged in the liquid to be heated. The wire on a vertical immersion heater is wrapped around the ceramic insert. This type of heater is typically used for heating fluids or gases in tanks or vessels with a vertical orientation.
- Save up to 30% on energy
- Operation up to 2,000°F
- Heavy duty leads
- Thermocouple, copper connectors, and protection tube included
HORIZONTAL IMMERSION HEATERS
Horizontal immersion heaters are installed horizontally into the side of a tank or container, with the heating element also submerged in the liquid to be heated. The wire on a horizontal immersion heater is laid flat vertically along the ceramic insert. This type of heater is typically used for heating fluids or gases in tanks or vessels with a horizontal orientation.
- Save up to 30% on energy
- Operation up to 2,000°F
- Heavy duty leads
- Thermocouple and cast copper connectors included
ADDITIONAL PRODUCTS
In addition to Immersion Heaters, we also supply additional products such as Seal Cones, Ceramic Inserts, Thermocouples, Mounting Hardware, Protection Tubes and more.
- Protection tubes manufactured with heavy duty material
- Seal cones rated up to 3,000°F
- Thermocouples available in various lengths
- Heavy duty mounting hardware